Arrayit Corporation Logo

Arrayit Corporation (ARYC) leads and empowers the genetic, research, pharmaceutical, and diagnostic communities through the discovery, development and manufacture of proprietary life science technologies and consumables for disease prevention, treatment and cure.  - Powerful Science for Life™

Products - Amplification & Labeling - aRNA Synthesis Kits for DNA Microarrays Applications in Gene Expression Profiling, SNP Analysis and Genomics

aRNA
For amplification of RNA for microarray, splice variant microarrays and other down stream applications where high quality aRNA is required.

This kit is optimized to use 50 ng-1 g of total cellular RNA as starting material. The process includes the following steps:

  • First Strand cDNA Synthesis
  • Second Strand cDNA Synthesis
  • Amplification of ds cDNA
  • Purification of ds cDNA
  • In Vitro Transcription with T7 RNA Polymerase featuring T7 Booster, a proprietary blend of enhancers to augment the polymerase activity resulting in an increase in both the yield and the amount of full-length transcripts. Special proteins are added into this enhancer mix that protects the nascent RNA strand during synthesis.
  • RNA Purification

If used properly this kit will generate 5-250 g of amplified anti-sense mRNA (aRNA) ready for labeling.

Table of Contents

  • Introduction
  • Quality Control
  • Product Advantages
  • Technical Assistance
  • Requirements
  • Short Protocol
  • Complete Protocol
  • Ordering Information
  • Warranty

Introduction
Congratulations on taking a big step towards improving the economies of scale, quality and speed of your genomics research. This booklet contains a complete set of protocols outlining the steps and principles needed to use ArrayIt® aRNA Synthesis kit.

Quality Control
TeleChem assures the performance of this product. The finest scientific research went into the development of this product. Rigorous quality control monitoring on a lot-by-lot basis guarantees that the ingredients conform to the highest industry standards.

Product Advantages

  • The most comprehensive kit available
  • Robust RT reaction; allows full length cDNA synthesis with unique primers
  • Unique second strand synthesis: takes the advantage of both linear and exponential amplifications
  • Purification using unique columns that minimize loss
  • Optimized reactions with unique additives, resulting in a huge incremental yield

Contents

Item

Packaging

Storage

Enzyme Mix 1

16.5 l in 0.5 ml tube

-20C Freezer

Enhancer solution

50 l in 0.5 ml tube

-20C Freezer

Reaction buffer 1

50 l in 0.5 ml tube

-20C Freezer

dNTP Mix

22 l in 0.5 ml tube

-20C Freezer

DTT

50 l in 0.5 ml tube

-20C Freezer

Primer 1AS

11 l in 0.5 ml tube

-20C Freezer

Primer 2AS

11 l in 0.5 ml tube

-20C Freezer

Primer 3AS

22 l in 0.5 ml tube

-20C Freezer

Primer 4AS

11 l in 0.5 ml tube

-20C Freezer

Enzyme Mix 2

11 l in 0.5 ml tube

-20C Freezer

Reaction Buffer 2

150 l in 0.5 ml tube

-20C Freezer

DNA Binding Buffer

1.1 ml in 2 ml tube

Room Temperature

DNA Wash Buffer Concentrate

0.5 ml in 8 ml bottle

Room Temperature

DNA Micro Column (without cap)

10 each

Room Temperature

Elution Tube (1.5 ml)

10 each

Room Temperature

2 ml Wash Tube

10 each

Room Temperature

Nuclease Free Water

1.5 ml in 2 ml tube

-20C Freezer

Enzyme Mix 3

22 l in 0.5 ml tube

-20C Freezer

NTP Mix

79.2 l in 0.5 ml tube

-20C Freezer

Reaction Buffer 3

22 l in 0.5 ml tube

-20C Freezer

DNAse

11 l in 0.5 ml tube

-20C Freezer

Sodium Acetate Solution

50 l in 0.5 ml tube

-20C Freezer

Linear Acrylamide

11 l in 0.5 ml tube

-20C Freezer

Technical Assistance
Please contact us if you have any comments, suggestions, or if you need technical assistance.  By electronic mail: arrayit@arrayit.com (under the subject heading please type ArrayIt technical assistance).  By telephone: (408) 744-1331, Monday—Friday PST 9:00am - 4:30pm. Please remember that we want to hear about your successes!

Requirements
Items needed but not supplied

  • Ethanol  100%
  • Ethanol 70%
  • Ice for incubation
  • PCR tubes

Equipment needed

  • Thermal cycler
  • Refrigerated microfuge capable of 10,000 rpm or more
  • Micro-pipettes
  • Vortex mixer
  • Homogenizer (if using tissue)
  • Temperature regulated water bath or dry bath

Note: Spin all tubes briefly before opening.

This kit is optimized to use 50 ng-1 g of total cellular RNA as starting material. The process includes the following steps:

  • First Strand cDNA Synthesis
  • Second Strand cDNA Synthesis
  • Amplification of ds cDNA
  • Purification of ds cDNA
  • In Vitro Transcription with T7 RNA Polymerase
  • RNA Purification

If used properly this kit will generate 5-250 g of amplified antisense mRNA (aRNA) ready for labeling.

Total working time required for this kit is between 5-6 hrs.

Short Protocol
1. First Strand cDNA Synthesis.
2. Second Strand cDNA Synthesis.
3. Amplification of dsDNA.
4. Purification of dsDNA.
5. In Vitro Transcription with T7 RNA Polymerase.
6. RNA Purification.

Complete Protocol
Step 1. First Strand cDNA Synthesis.
In a PCR tube on ice add the following:

  • Eluted RNA (50 ng-1 g)                x l
  • Primer 1AS                                 1 l
  • Nuclease Free Water to make up   11.5 l

Incubate the reaction tube at 65C for 5 mins.
Incubate at room temperature for 10mins to allow the annealing of the primers.
Add the following to the reaction tube:

  • Enhancer Solution    2 l
  • Reaction Buffer 1      2 l
  • Enzyme Mix 1           1.5 l
  • dNTP Mix                 1 l
  • Primer 2AS             1 l
  • DTT                      1 l

Total reaction volume    20 l

Incubate in a PCR machine at 42C for 60 mins.
Followed by 95C for 5 mins to inactivate the Reverse Transcriptase.
Chill on ice for 5mins and briefly spin to collect all the liquid.

Step 2. Second Strand cDNA Synthesis.
To the reaction tube on ice add the following:

  • Enzyme Mix 2                 1 l
  • Reaction Buffer 2            10 l
  • dNTP Mix                       1 l
  • Primer 3AS                     2 l
  • Nuclease free water        16 l
  • Total Reaction Volume  50 l

Perform the following pattern of incubation in a thermal cycler:

  • Incubation   37C for 10 mins
  • Denaturation   98C for 40 secs
  • Anneal   60C for 30 secs
  • Extend   72C for 4 mins
  • Incubation   4C for 5 mins

Step 3. Amplification of ds cDNA.
Briefly spin to collect all the liquid and add 1 l of Primer 4 AS.
Perform five to ten cycles of PCR in a thermal cycler depending on the starting amount of RNA viz. when starting with 50 ng total RNA perform 10 cycles, when amplifying from 1 g total RNA perform 5 cycles.

  • Initial Denaturation 98C for 2 mins
  • Denaturation 98C for 30 secs    (Cycle 5-10 times)
  • Anneal   60C for 30 secs (Cycle 5-10 times)
  • Extend   72C for 4 mins (Cycle 5-10 times)
  • Terminal Extension 72C for 10 mins
  • Incubation 4C for 5 mins

Briefly spin to collect all the liquid.

Step 4. Purification of ds cDNA.

  • Before starting add 2 ml of 100% ethanol to DNA Wash Buffer Concentrate
  • Add 100 l DNA Binding Buffer
  • Load the entire contents onto a DNA micro column and place the column in a 2 ml wash tube
  • Centrifuge for 1 min at full speed in a microfuge (>10,000 rpm), discard the flow through and reuse the wash tube
  • Add 100 l of DNA wash buffer to the column and spin at full speed for 1 min
  • Add another 100 l of DNA wash buffer to the column and spin at full speed for 2 min
  • Discard the 2 ml wash tube and carefully place the column in an elution tube
  • Add 8 l of nuclease free water that has been pre-warmed to 60C to the center of the column
  • Wait for 2 mins and spin at full speed for 1 min
  • Reload the filtrate onto the column
  • Wait for 2 mins and spin at full speed for 1 min
  • Discard the column and use the cDNA in the next step

Note: If desired the eluted cDNA can now be frozen and stored at –20C.

Step 5. In Vitro Transcription with T7 RNA Polymerase.
Place a PCR tube at room temperature and add the following:
Note: Assemble the T7 reaction at room temperature, if the reaction buffer 3 shows a white precipitate; incubate the buffer at 37C for 5 mins and allow to cool to room temperature before setting up the reaction

  • Purified cDNA                6.8 l
  • Reaction Buffer 3          2 l
  • NTP Mix                      7.2 l
  • DTT                            2 l
  • Enzyme Mix 3               2 l
  • Total reaction volume  20 l

Incubate in a PCR machine at 37C for 30-60 mins.
Use 30 mins when the starting total RNA is 1g and 60 mins when the starting total RNA is 50 ng.
Chill on ice for 5 mins and briefly spin to collect all the liquid.

Step 6. RNA Purification.

  • Add 1 l of DNAse to the reaction tube and incubate 37C for 15 mins
  • Chill on ice for 5 mins and briefly spin to collect all the liquid
  • Add 2 l of Sodium Acetate Solution
  • Add 50 l 100% ethanol
  • Add 1 l of Linear Acrylamide
  • Mix gently with a pipette tip and incubate at -20C for 30 mins
  • Centrifuge for 15 mins at full speed in a microfuge (>10000 rpm) at 4C
  • Remove the supernatant carefully and gently rinse the pellet twice with 200 l of 70% ethanol
  • Briefly air dry the pellet and reconstitute in 25 l nuclease free water
  • RNA can be stored at -70C as a dry pellet or re-suspended in nuclease free water or TE or other suitable buffer

Ordering Information

Product

Description

Catalog ID

Price (US dollars)*

aRNA Synthesis Amplification Kit

Arrayit aRNA Synthesis Amplification Kits use 50 ng-1 g of total cellular RNA as starting material to generate 5-250 g of amplified antisense mRNA (aRNA) that is ready for labeling and use in downstream applications such as DNA microarrays, 10 reactions per kit.

ASK

$1,064
Purchase1

*To order Arrayit Products: call 408-744-1331, fax 408-744-1711, email arrayit@arrayit.com or click on the purchase button to proceed directly to the purchase page.

*Add shipping and handling to all orders.

*International pricing may vary as much as 30% (or more depending on country) due to import duties, stocking fees and technical support.

Warranty
Arrayit Universal mRNA products are sold for research purposes only. Arrayit products are not for use in human diagnostics or for drug purposes, nor are they to be administered to humans in any way.  Extreme care and exact attention should be practiced in the use of the materials described herein.  Arrayit products are subject to extensive quality control and are guaranteed to perform as described when used properly. This product is stable for at least 1 year from the date of purchase when stored at –80C. Any problems with these products should be reported to Arrayit immediately. Our liability is limited to the replacement of the product, or a full refund.  Any misuse of this product is the full responsibility of the user, and Arrayit makes no warranty or guarantee under such circumstances.

Copyright 1993-2016 Arrayit Corporation. All rights reserved.